1976 Cincinnati Milacron DE 18” x 36” Universal Hydraulic Cylindrical Grinder

1976 Cincinnati Milacron DE 18” x 36” Universal Hydraulic Cylindrical Grinder
Priced to Sell ~ Call Now!!

Located in Milpitas, CA is a 1976 Cincinnati Milacron DE Grinder for sale.
The Equipment is in good condition and can be shown Monday-Friday from 9am-5pm
We’re asking $11,000 OBO, so make me an offer!
Call Ben Kaplan at (714) 881-3115 Day or Night!!!

18" X 48" CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
W/SWING DOWN I.D. GRINDING ATTACHMENT W/SPINDLE

MODEL: DE
S/N: 35326D 76-003
NEW: 1976

SWING OVER TABLE ............................ 18-15/16"
DISTANCE BETWEEN CENTERS .......................... 48"
TABLE SWIVEL, TOWARD WHEELHEAD .............. 9 DEGREES
AWAY FROM WHEELHEAD ........... 2 DEGREES

GRINDING WHEELHEAD:
LOWER SWIVEL LEFT & RIGHT OF CENTER ............ 90 DEG.
UPPER SWIVEL, RIGHT & LEFT ..................... 30 DEG.
MOTOR .......................................... 5 HP
GRINDING WHEEL SIZE ....... 14" WHEEL DIA. X 1-1/2" X 5"

TABLE TRAVERSE:
INF. VARIABLE TABLE SPEEDS ............. 3" TO 220" IPM
HAND TABLE TRAVERSE PRE REVOLUTION OF HANDWHEEL
(RAPID/SLOW) ............................ 15/16" / 0.2"

CROSS FEED:
AUTOMATIC INFEED AT TABLE REVERSAL:
LOW ................................. 0.0002" TO .0005"
HIGH ................................. .0005" TO .0125"
WHEELHEAD MOVEMENT PER TURN OF HANDWHEEL:
LOW ............................................ 0.050"
HIGH ........................................... 0.250"
MINIMUM INFEED ON DIAMETER ................... 0.00005"

HEADSTOCK:
MOTOR .......................................... 1 H.P.
TAPER HOLE IN SPINDLES ........................ #9 B&S
INF. VARIABLE WORKHEAD SPEEDS .......... 50 T0 500 RPM
SPINDLE NOSE, AMERICAN STANDARD ................... 5"
HEADSTOCK SWIVEL, TOWARD WHEELHEAD ............ 90 DEG.
AWAY FROM WHEELHEAD ....... 30 DEG.

FLOOR SPACE FOR OPERATION:....................72" X 185"
APPROX. DIMENSIONS:............ 166" L-R, 72" F-B, 66" H
APPROX. MACHINE WEIGHT ...................... 12,800 LBS

FULL HYDRAULIC OPERATION FEATURING:
-POWER TABLE TRAVERSE
-PICK FEED (AUTO INFEED)
-PLUNGE
-RAPID ADVANCE & RETRACTION OF WHEEL
-SPARKOUT TIMER

SWING DOWN I.D. ATTACHMENT W/SPINDLE
CHUCK MOUNTED ON WORKHEAD
STEADY REST
BLOCK ON TABLE FOR MOUNTING AN ACCESSORY
INFINITELY VARIABLE WORKHEAD SPINDLE SPEEDS
WORKHEAD SPINDLE IS BOTH LIVE & DEAD
ELECTRICAL CABINET
SELF-CONTAINED COOLANT SYSTEM
5 H.P./3/60/230-460 VOLT SPINDLE MOTOR