Price: $85,000
MORBARK TUB GRINDER MODEL # 1000
(Click an image for full size)
| Ad # | 2037085 |
|---|---|
| Contact | BRAD AARON |
| Phone | 3172284900 EXT 100 |
| City | INDIANAPOLIS |
| Zip | 46268 |
| Created | October 16, 2009 |
| Updated | October 16, 2009 |
| Expires | January 16, 2010 |
| Viewed | 80 times |
THIS MORBARK TUB GRINDER HAS 6264 HOURS ON IT THE MODEL NUMBER IS 1000.
-TUB HAS A 10'6" DIAMETER OPENING ACROSS THE TOP, 8' DIAMETER AT INSIDE BASE, AND 50" DEEP, WALLS CONSTRUCTED OF 1/4" REINFORCES STEEL PLATE FLOOR CONSTRUCTED OF 3/8" THICK T-1 WEAR-RESISTANT STEEL, SUPPORTED BY(10) RUBBER GUIDE ROLLS, HYDRAULIC FULL TILT TUB FOR EASY ACCESS TO HAMMERMILL, WITH HYDRAULICALLY POWERED VARIABLE RPM FORWARD AND REVERSE TUB CONTROL WITH ELECTRONIC SENSOR DRIVE.
-26" X 46" HAMMERMILL OPENING WITH 16"DIAMETER ROTOR, (8) 1-1/4" HEAT TREATED HAMMER RETAINING RODS MOUNTED ON A 5" DIAMETER ROTOR SHAFT WITH 3-7/16" BEARINGS DIRECT DRIVEN AT ENGINE RPM'S (36) 1-1/4" WIDE REPLACEABLE TEETH INSERTS
-ONE SET OF TWO (2) 2" X 4" OBLONG X 3/4" THICK STEEL HEAVY DUTY SCREENS
-TUB COVER FOR DEBRIS CONTAINMENT
-DISCHARGE SYSTEM CONSISTING OF DUAL (2) HYDRAULICALLY POWERED 12" DIAMETER AUGERS AND 28" X 26' BELT CONVEYOR WITH HYDRAULIC FOLD FOR TRANSPORT
-ENGINE GAUGE PANEL AND EMERGENCY SHUT DOWN SYSTEM
-HEAVY DUTY TUBE TYPE FRAME, FRONT STABILIZERS, SINGLE AXLE 22,500# SUSPENSION AND PINTLE HITCH
-WIRELESS REMOTE CONTROL PROVIDES VARIABLE SPEED TUB ROTATION-FORWARD AND REVERSE
-255/70R X 22.5, 16 PLY RADIAL TIRES
-AIR BEAKES AND LIGHTS TO ICC SPECIFICATIONS
-125 GALLON FUEL TANK
-80 GALLON HYDRAULIC TANK
OPTIONAL EQUIPTMENT:
-SPECIAL 12' DIAMETER TUB FLARE WITH DUAL FOLDING SECTIONS FOR LEGAL TRANSPORT ( WIDTH 8'6")
-WIRELESS REMOTE - SIX (6) FUNCTION CONTROL PROVIDES VARIABLE SPEED TUB ROTATION ( FORWARD AND REVERSE ), ENGINE RPM'S ( HIGH OR LOW ), AND EMERGENCY KILL ON THE DIESEL ENGINE IN LIEU OF 2-FUNCTION REMOTE CONTROL
-MAGNETIZED END PULLEY FOR DISCHARGE CONVEYOR, COMPLETE WITH COLLECTION SLIDE TRAY FOR FERROUS METAL REMOVAL
-FIFTH WHEEL TOWING ARRANGEMENT WITH HYDRAULIC STABILIZERS AND 120 GALLON HYDRAULIC TANK, IN LIEU OF STANDARD PINTLE HITCH AND HYDRAULIC TANK
POWER OPTION:
-CATERPILLAR MODEL C12 ELECTRONIC DIESEL ENGINE, 455-HP @ 2100 RPM, COMPLETE WITH IN-LINE SPREAD 314 CLUTCH COMPLETE WITH DIRECT DRIVE AND TORQUE LIMITING CLUTCH, INCLUDING NESSARY HYDRAULIC COMPONENTS, WIRING, AIR CLEANERS, FILTERS, RADIATOR SCREENING GUARDS, AND ALL NECESSARY GAUGES
-BREAK-AWAY TORQUE LIMITER
CALL BRAD AARON @ 1-317-228-4900 EXT 100 --PRODUCT LOCATED IN INDIANAPOLIS, INDIANA
-TUB HAS A 10'6" DIAMETER OPENING ACROSS THE TOP, 8' DIAMETER AT INSIDE BASE, AND 50" DEEP, WALLS CONSTRUCTED OF 1/4" REINFORCES STEEL PLATE FLOOR CONSTRUCTED OF 3/8" THICK T-1 WEAR-RESISTANT STEEL, SUPPORTED BY(10) RUBBER GUIDE ROLLS, HYDRAULIC FULL TILT TUB FOR EASY ACCESS TO HAMMERMILL, WITH HYDRAULICALLY POWERED VARIABLE RPM FORWARD AND REVERSE TUB CONTROL WITH ELECTRONIC SENSOR DRIVE.
-26" X 46" HAMMERMILL OPENING WITH 16"DIAMETER ROTOR, (8) 1-1/4" HEAT TREATED HAMMER RETAINING RODS MOUNTED ON A 5" DIAMETER ROTOR SHAFT WITH 3-7/16" BEARINGS DIRECT DRIVEN AT ENGINE RPM'S (36) 1-1/4" WIDE REPLACEABLE TEETH INSERTS
-ONE SET OF TWO (2) 2" X 4" OBLONG X 3/4" THICK STEEL HEAVY DUTY SCREENS
-TUB COVER FOR DEBRIS CONTAINMENT
-DISCHARGE SYSTEM CONSISTING OF DUAL (2) HYDRAULICALLY POWERED 12" DIAMETER AUGERS AND 28" X 26' BELT CONVEYOR WITH HYDRAULIC FOLD FOR TRANSPORT
-ENGINE GAUGE PANEL AND EMERGENCY SHUT DOWN SYSTEM
-HEAVY DUTY TUBE TYPE FRAME, FRONT STABILIZERS, SINGLE AXLE 22,500# SUSPENSION AND PINTLE HITCH
-WIRELESS REMOTE CONTROL PROVIDES VARIABLE SPEED TUB ROTATION-FORWARD AND REVERSE
-255/70R X 22.5, 16 PLY RADIAL TIRES
-AIR BEAKES AND LIGHTS TO ICC SPECIFICATIONS
-125 GALLON FUEL TANK
-80 GALLON HYDRAULIC TANK
OPTIONAL EQUIPTMENT:
-SPECIAL 12' DIAMETER TUB FLARE WITH DUAL FOLDING SECTIONS FOR LEGAL TRANSPORT ( WIDTH 8'6")
-WIRELESS REMOTE - SIX (6) FUNCTION CONTROL PROVIDES VARIABLE SPEED TUB ROTATION ( FORWARD AND REVERSE ), ENGINE RPM'S ( HIGH OR LOW ), AND EMERGENCY KILL ON THE DIESEL ENGINE IN LIEU OF 2-FUNCTION REMOTE CONTROL
-MAGNETIZED END PULLEY FOR DISCHARGE CONVEYOR, COMPLETE WITH COLLECTION SLIDE TRAY FOR FERROUS METAL REMOVAL
-FIFTH WHEEL TOWING ARRANGEMENT WITH HYDRAULIC STABILIZERS AND 120 GALLON HYDRAULIC TANK, IN LIEU OF STANDARD PINTLE HITCH AND HYDRAULIC TANK
POWER OPTION:
-CATERPILLAR MODEL C12 ELECTRONIC DIESEL ENGINE, 455-HP @ 2100 RPM, COMPLETE WITH IN-LINE SPREAD 314 CLUTCH COMPLETE WITH DIRECT DRIVE AND TORQUE LIMITING CLUTCH, INCLUDING NESSARY HYDRAULIC COMPONENTS, WIRING, AIR CLEANERS, FILTERS, RADIATOR SCREENING GUARDS, AND ALL NECESSARY GAUGES
-BREAK-AWAY TORQUE LIMITER
CALL BRAD AARON @ 1-317-228-4900 EXT 100 --PRODUCT LOCATED IN INDIANAPOLIS, INDIANA
Avoid scams and fraud
Signs of fraud: wire transfer, money orders, cashier checks, shipping, escrow, "transaction protection", "guarantee". Be safe by dealing locally.
Read more
© 2009 ClassifiedAds.com, Inc. All rights reserved.
