Quickslide Gutter Guards are incredibly fast and easy to install low profile gutter guards, fits all 5k or 6k gutters. Made of a semi circular durable ultra tough Pvc 24 in long x 3/32 thick (almost 1/8 thick), with alternating upper and lower slots for effective filtration and water intake. To install, place ladder at center of the gutter. Start by simply sliding sections together, pushing sections laterally to the right under the gutter hangars, you will need 2” 5/8 inches from gutter hangers to the bottom of gutter to slide gutter guard. When the first slid section installed reaches the end of the gutter, using no snaps, clips or screws, start the same process, sliding sections to the left, stopping when it reaches the other end. When completed, all installed sections will converge to your current ladder position, reducing ladder time, setup time and promoting a faster, safer job environment. Lastly, install the last remaining section, at your current ladder position, which will lock the system in place. If the last section is less than a 2 ft section, simply measure and cut section to fit, using a fine tooth saw (hacksaw). Watch our 18 feet in 44 sec. installation video. Make your own inside or outside corners in 3 simple cuts as shown in our How it works section. We also offer other package deals w/ free shipping. Visit our website @ http://www.gutterchannelguard.com. for more information or call 618-610-2087