Hartke 150W Acoustic Ribbon Guitar Amp

Asking $425 obo

This is Used only for a Total of an Hour when first bought. NEW CONDITION { Hartke 150W Acoustic Ribbon Guitar Amp in the Original packing box }
Unbelievable effects, from 01 to 100, and plenty of volume for Any venue. It is in New condition and everything about it works perfectly.
I have been a Musician/ One Man Band " for 30 years, and have used Fender, Gibson, Crate, JBL's, Pevey's, Bose and I have
never..........Ever....Seen an Amp that has the sound and the power of this Acoustic Guitar Amp!!!
I just don't need all the effects that this Amp provides, and I need the cash, and I play thru my PA System.

Description:
The Hartke Acoustic Ribbon series faithfully reproduces the sound of the any acoustic instrument thanks to their reference grade power amplifier section and unique speaker system featuring 5-inch, full range drivers and a 2 x 4 inch, planar ribbon transducer. The AC150 has four 5-inch drivers and 150 watts of power. It features two input channels with Channel 1 providing inputs for passive or active acoustic guitar pick-ups, and Channel 2 providing XLR mic and dual RCA line inputs. A variable Notch Filter and Phase switch are also included to help reduce feedback.

The AC150 also features a 5-band graphic equalizer to shape the overall tonal response. Dazzling multi effects like delay, reverb and chorus are available from the built-in, 100 preset, 24-bit digital effect processor. The rich brown enclosures have been beautifully appointed with gold hardware and feature Hartke’s trademarked Kickback™ design and time-tested rugged construction. While the Acoustic Ribbon Series are packed with all the features demanded by the most discerning acoustic artists, what makes the amplifier special is the unmatched sonic performance.

The Acoustic Ribbon amplifiers are the perfect solution for electric acoustic guitars, and also, for multi instrumentalists who play electric violin, mandolin, Dobro and other acoustic electric instruments too. To build a fine acoustic instrument, a luthier must pay special attention in the selection of the various components like the wood for the top, sides and neck, as well as, the construction of the internal bracing. Hartke engineers have applied the same careful approach in the selection of the critical components and with the internal construction to produce a sound that is truly unique to the Acoustic Ribbon amplifiers. The full range 5-inch drivers, provide a smooth and even frequency response without the low frequency resonance associated with larger drivers. The ribbon transducer provides sweet high frequency response without the resonance and distortion that comes with standard tweeters. The result is sound reproduction that is totally true to the sound of the instrument it is amplifying. Simply put, the amps sound like your instrument, only louder.

Designed in a precision tuned Kickback™ enclosure, with four custom-voiced 5-inch full ranged drivers arranged in stereo, and a 2-inch by 4-inch ribbon tweeter, the AC150 naturally recreates the sound of the acoustic instrument without adding any unwanted coloration or distortion. Channel 1 has active and piezo instrument inputs, with bass and treble controls, while channel two has XLR microphone and RCA line inputs. There is a 5-band graphic EQ and a built-in 100 preset 24-bit stereo digital effects processor, which can be routed to either channel.

The AC150 features a 150 watt tri-amped design, with 50 watts powering the left and right full range speakers and 50 watts powering the high frequency ribbon tweeter. To reduce feedback, there is a phase switch on channel 1 as well as a variable notch filter with depth control. On the rear panel of the amplifier there is an effects loop with stereo return, and stereo XLR direct outputs. Simply put the Hartke Acoustic Ribbon amplifiers sound like your instrument, only louder

Features:
150 Watt Acoustic Guitar Combo
Four 5" Woofers and a 2" x 4" Ribbon High Frequency Transducer
5-Band Graphic EQ
Phase Switch and Variable Notch Filter Feedback Control
100 24-Bit Built-In Stereo Digital Effects
Effects Loop with Stereo Return and Stereo Direct Output
Precision tuned Kickback™ Enclosure

Specifications
Nominal Input Level
Active
Piezo

Mic Input (CH2) -50 dBu.

Line Inputs ( CH2) -20 dBu

Rated Output Power

AC150 150 watts (2 x 50 Low Freq. 1 x 50 High Freq)

Equalizer

Five-Band Graphic (Main Output)

±12 dB, center @ 100 Hz, 350 Hz, 1 kHz, 3.5 kHz, 10 kHz

Connectors

Ch1 Active Input 1/4" phone

Ch1 Piezo Input 1/4" phone

Ch2 Mic Input Female XLR

Ch2 CD In Left and Right RCA

Headphone - St. TRS 1/4" phone

Direct Output Male XLR

Speaker System Impedance (Ohms): 4 Ohms Impedance

Low Frequency Drivers

AC150 4 x 5" Special Design Hartke full range 8 ohm, 25 watt Drive Unit

High Frequency Driver

AC150 2 x 4-inch planer ribbon on a 7 x 7 waveguide.

Dimensions

AC150

Height:18.85" (47.88 cm)

Width:19.75" (50.17 cm)

Depth: 15.25" (38.48 cm)

Weight
AC150 48 lbs. (21.8 kg)